Introduction of electronics - analogue and digital signal processing
The physical mode of action is based on the eddy current effect. A high frequency magnetic field generated by the measuring coil (sensor) induces eddy currents in the electrically conductive material to be detected. This equates to a power loss in the coil or an increased attenuation. An evaluation is made of the resonance resistance of the resonant circuit which changes with the distance of the sensor to the measured object.
A special temperature compensation optimizes the temperature stability of the sensor. All electrically conductive materials are suitable as measurement media. Optimal measurements are achieved on ferromagnetic materials. The sensors are wear- and maintenance-free. Environmental influences from water, oils, emulsions and electromagnetic interference fields do not affect measurement accuracy.
The IWA / ADP is a non-contact position measuring system with microprocessor-based measured data processing.
Calibration / Linearization
Specification of 5 distance points
Storage of 3 calibration characteristics
Continuous Operation / Linear Displacement Measuring